Keppinger pitch preview mod plus Espe01 mod?

I built an Etherwave standard kit with some modifications. See link (http://www.flickr.com/photos/97827539@N00/3244878436/in/set-72157613235006060/).

One of the mods was the addition of pitch preview using a PCB supplied by Mark Kippinger. I find this enhancement very useful.

Is it possible to install the Espe01 mod along with the Kippinger mod?

Thanks for your ideas.

Please open your beautiful instrument and take a high resolution picture of the region around the extension connector at the back side of the circuit board. The ESPE01 module has to be fitted directly onto the extension connector, while wires which are connected to the latter and lead elsewhere are not a problem.

Thierry,

Thank you for your rapid response.

I have images of the Kippinger schematic as well as the PCB in place.

How do I get these images to you? (BTW, my e-mail address is not hidden.)

If only one mod is possible, I would be hard-pressed to decide which one. It would be a shame to lose pitch preview and have a non-functioning jack on the front of my case.

Thank you very much for your time.

You've got email! ;-)

ExclamPt,

Your email address is not hidden to you or to administrators such as Thierry, but be assured that it is concealed from the rest of the world.

Gordon, thank you for this hint! Yes, it seems that only the user himself and the admins may see his email address. But finally ExclamPt and I are exchanging emails, I got the pictures and I will develop a strategy for him.

Actually I'm also waiting for news from Thomas Grillo who is currently trying to solve a similar problem on one of his Etherwaves.