Flashback: Big Briar Model 500 Theremin Controller
I recently learned about a really fun blog called Retro Synth Ads. If you're like me and spent your youth pouring through issues of magazines like Keyboard, Electronic Musician, and others looking at gear, this blog will bring back some great...
Recent Forum Posts
-
by pitts8rh on Etherwave Volume Troubleshooting 3 hours ago -
by dewster on Let's Design and Build a (mostly) Digital Theremin! 13 hours ago -
by oldtemecula on One-handed theremin with two antennas on the same side 2 days ago -
by nclm on Playing the theremin with headphones, a few questions 2 days ago -
by dewster on Theramin or Theramini? 3 days ago
Recent Comments
-
by merula on article A very special Theremin Academy will happen in Lausanne/Switzerland in February 2019 38 days ago:
"Where can I get one of those boxes?"
-
by Dominique on photo The DC heater supply 52 days ago:
"I used veroboard for the print. Veroboard is OK with voltages up to 50V."
-
by Dominique on photo The inside 52 days ago:
"All shielded cables are 2 wires shielded cables. With these, it is possible to use one wire for the signal ground, one wire for the signal, they will..."
-
by Dominique on photo The inside 52 days ago:
"The coils with the white strong paper are hand made coils. I keep these sheets of paper as it, because as long I am working on that project, they are..."
-
by Dominique on photo The antennas version 2 52 days ago:
"The shields provides a good protection against noises like hum."